...

ONVIF Profiles Explained: Which Profiles Do IP Cameras Need?

Table of Contents

Bokysee ONVIF profiles explained banner with Profile S, T, G and M and a PTZ camera

ONVIF profiles define how IP cameras communicate with recorders and video management systems. Profile S, T, G, and M cover different functions, from video streaming to edge storage and analytics metadata. Understanding these differences helps installers and system integrators select cameras that match their NVR or VMS requirements.

This article explains what each profile supports, how to verify ONVIF conformance, and which profiles matter for different surveillance projects. It also briefly covers other profiles, including those used in access control systems.

What Are ONVIF Profiles in IP Camera Systems?

ONVIF profile claim on a camera datasheet listing Profile S, T, G and M features

A profile is a published list of required features, so conforming devices guarantee a defined set of behaviors rather than a vague promise.

Why Profiles Exist

Early ONVIF conformance meant a device followed the core specification, but it did not say which optional features were actually implemented. A camera and a recorder could both claim ONVIF support and still fail to work together on anything beyond basic discovery.

Profiles solved this by grouping features into fixed, testable sets. A vendor that claims a profile is declaring that the device passed conformance tests for every mandatory feature in that set, which is a much stronger statement than a generic compatibility claim.

How to Read a Profile Claim

Each profile has a letter and a defined scope. A device advertises the profiles it conforms to, and a client such as an NVR can rely on the features inside that profile being present. When two devices share a profile, the features covered by that profile should interoperate, which is the practical test of a compatible system. In short, a profile is the shared contract both sides agree to honor, and a conformance claim is the evidence that the contract was actually tested. Our article on ONVIF IP camera compatibility walks through what to verify before purchase.

ONVIF Profile S: Basic Video Streaming and PTZ Control

ONVIF Profile S live streaming and PTZ control with a Bokysee speed dome camera

Profile S is the workhorse of the industry: live video, audio, and PTZ control across brands, and it is the profile most recorders expect.

What Profile S Covers

Profile S was introduced for basic video streaming between IP cameras and video management clients from different manufacturers. It covers video streaming and configuration, with additional support for functions such as PTZ control and audio when the conformant device and client implement those capabilities.

However, ONVIF announced the end of support for Profile S in October 2025 because its required Username Token Authentication no longer aligns with current cybersecurity recommendations. March 31, 2027, is the final date for manufacturers to submit products for Profile S conformance. Existing Profile S devices can still operate, but new projects should consider Profile T as the preferred streaming profile.

Where Profile S Fits Today

Profile S remains relevant when maintaining existing surveillance systems or integrating older cameras and recorders. It can still support basic video streaming between conformant devices and clients. However, for new installations, Profile T is generally the better option because it supports more modern authentication and streaming features. Buyers should also check whether their existing NVR or VMS supports Profile T before replacing Profile S equipment.

ONVIF Profile T: Advanced Video Streaming and Imaging Features

ONVIF Profile T H.265 advanced streaming with a Bokysee motorized zoom bullet camera

Profile T modernizes Profile S with newer codecs, encrypted streams, and richer metadata, and it is backward compatible for basic use.

What Profile T Adds

Profile T is ONVIF’s advanced video streaming profile and the recommended successor to Profile S. It supports H.264 and H.265 video compression, imaging settings, motion and tampering events, metadata streaming, and bidirectional audio. It also covers more secure authentication and HTTPS media transport.

Profile T does not include every feature defined in Profile S. For example, Username Token Authentication, IP address filtering, MJPEG, and MPEG4 are not covered by Profile T. These functions may still be available through a device’s native implementation, but they are not part of Profile T conformance.

S vs T in Practice

Profile T is generally the better choice for new camera deployments that need modern video compression, secure communication, and standardized event handling. However, buyers replacing older Profile S equipment should verify the authentication methods, codecs, and streaming capabilities supported by the existing NVR or VMS.

Profile T does not guarantee automatic compatibility with every older Profile S client. Check both devices’ conformance information and test the required functions before deployment. Our comparison of ONVIF Profile S vs Profile T explains the main differences in more detail.

Profile Main Focus Key Features
Profile S Live streaming and PTZ Video, audio, PTZ control, RTSP
Profile T Advanced streaming H264 and H265, HTTPS, rich metadata
Profile G Edge storage Onboard recording, search and replay
Profile M Analytics metadata Object events, smart event streams
Bokysee ONVIF Profile T conformant IP camera for mixed-brand projects

Selecting cameras for a mixed-brand recorder? Bokysee builds ONVIF Profile S and T conformant IP cameras that interoperate with major NVR and VMS platforms, with OEM and ODM options for your brand.

Request camera specifications →

ONVIF Profile G: Edge Storage and Video Retrieval

ONVIF Profile G edge recording on a Bokysee solar camera with SD card and NVR retrieval

Profile G is for devices that record at the edge, letting a client search and pull footage straight from the camera.

What Profile G Covers

Profile G is designed for video recording and storage retrieval. It allows a conformant client, such as a VMS, to configure, request, and control recordings stored on a compatible device. This includes searching and retrieving video footage from supported edge storage, such as an IP camera with onboard recording.

However, having an SD card slot does not automatically make a camera Profile G conformant. The camera must support the relevant Profile G interfaces, and the receiving VMS or NVR must also support the corresponding client functions.

When Profile G Matters

Profile G is useful when a project requires local recording and remote access to stored footage through a third-party VMS. For example, a camera may continue recording to its SD card when the central NVR is temporarily unavailable. Once network access is restored, a compatible client can request and retrieve the stored footage through the standardized recording interface.

If a project only needs local SD card recording without remote retrieval through an ONVIF client, Profile G may not be necessary. Check both the camera and VMS specifications before including it in the project requirements.

ONVIF Profile M: AI Metadata and Smart Event Integration

ONVIF Profile M AI metadata with a person detection frame on a Bokysee smart camera

Profile M standardizes the analytics output, so object and event metadata flows between camera and recorder in a shared format.

What Profile M Covers

Profile M deals with analytics metadata rather than pixels. It standardizes how a camera reports detected objects, classifications, and events to a client, covering the structure of that metadata and how it is streamed. A conforming camera can send structured event data that a conforming recorder can search and display.

This is what makes cross-brand smart search possible, since the metadata arrives in a predictable format instead of a vendor-specific one. The profile describes the analytics output, not the analytics engine, so a camera can use any detection technology as long as it reports results in the standard structure.

When Profile M Matters

Profile M becomes relevant when a system uses smart search, such as filtering recordings by person or vehicle detections. If the analytics features are used only inside the camera’s own app, the profile is less critical, but for cross-brand smart events it is the piece that keeps metadata usable. As AI features spread across the industry, Profile M is the profile that keeps those features from being locked to a single vendor’s platform.

How to Choose the Right ONVIF Profile for Your Security System

Match the profile to the job: streaming needs S or T, edge recording needs G, and smart events need M.

Match Features to the Project

Start from the feature you actually need. A basic live-view and record job needs only Profile S or T. Add Profile G when edge storage is part of the design, and add Profile M when smart event search must work across brands. You do not need every profile on every camera, only the ones the project uses. Over-specifying profiles adds cost and limits your options without improving the parts of the system that actually matter. A focused spec also makes it easier to compare vendors, since every camera is being measured against the same small set of requirements.

Verify Both Sides of the Link

Conformance is only useful when both ends support the same profile, so check the recorder and software as carefully as the cameras. A camera that conforms to Profile M does nothing for a recorder that only understands Profile S, and the reverse is just as true. When a manufacturer lists a profile on a camera, confirm the recorder you plan to pair it with lists the same profile, since a mismatch here is the most common cause of a mixed-brand integration that behaves like a non-compatible one. The official profile list is published by the ONVIF forum, and the pairing process for a specific setup is covered in our ONVIF integration walkthrough.

Frequently Asked Questions About ONVIF Profiles

Which ONVIF profile do most IP cameras support?

Many IP cameras support Profile S or Profile T. Profile S is the older profile for basic video streaming, while Profile T supports modern video streaming features, including H.264 and H.265 encoding and HTTPS media transport. For new projects, Profile T is generally the better option.

What is the difference between ONVIF Profile S and Profile T?

Profile S covers basic video streaming, while Profile T supports newer streaming capabilities, including H.264 and H.265 encoding, HTTPS media transport, and bidirectional audio. Profile T is recommended for new integrations, but it is not fully backward compatible with every Profile S feature or client. Check the supported features on both devices before deployment.

Do I need Profile G for a normal NVR system?

Not necessarily. Profile G is useful when a camera or local device stores video footage and an NVR or VMS needs to search, manage, or retrieve those recordings. A standard system that records video directly to an NVR may not need Profile G. Both the recording device and client must support the relevant Profile G functions.

What does ONVIF Profile M do for AI cameras?

Profile M standardizes the configuration and exchange of analytics metadata and events. An AI camera or analytics system can send supported information, such as person or vehicle detections, to a compatible recorder or VMS. Cross-brand smart search depends on the analytics features and Profile M interfaces supported by both devices.

Can a camera support more than one ONVIF profile?

Yes. A single camera can conform to multiple ONVIF profiles, such as Profile T for video streaming and Profile M for analytics metadata. Each profile covers a different set of functions, so check the camera’s official conformance record to confirm which profiles its specific model supports.

How do I know a recorder and camera will work together?

Check whether both devices support the same ONVIF profile and the specific features required for your system. Also compare video codecs, authentication methods, firmware versions, and device roles. Matching profiles provide a basis for interoperability, but testing the camera with the intended NVR or VMS helps confirm compatibility.

How can I check if an IP camera is ONVIF certified?

Search for the exact camera model in the official ONVIF Conformant Products database. Check its listed profiles and conformance details rather than relying only on an ONVIF-compatible label in a product brochure. Different models within the same product series may have different conformance records.

Final Thoughts on ONVIF Profiles

ONVIF profiles exist to turn a vague claim of interoperability into something a buyer can actually verify. Profile S and T cover the streaming most projects need, Profile G covers edge storage, and Profile M covers the analytics metadata behind smart search. Once you read a spec sheet as a list of profiles rather than a single badge, choosing compatible hardware becomes a matching exercise instead of a gamble.

The profiles you do not need are just as important as the ones you do, because skipping them keeps the specification focused and the cost in line. Pick the profiles that match the project’s real features, verify both ends of every link, and a mixed-brand system becomes a predictable one.

For a mixed-brand system, match the profile to each feature and confirm both ends of the link before ordering, because a mismatch on a single profile can quietly disable the one feature the client asked for. If your product line needs to conform to the profiles your customers already use, talk to Bokysee about ONVIF-compliant cameras built for third-party recorders.

Contact Us

Wechat

en_USEnglish
logo w

Get a Quick CCTV Quote

Tell us what you need. Our team will recommend the right CCTV products and reply within 24 hours.